Impact Pulveriser (Bravo) - Impact Pulverizer (Bravo) -
PVC scrap recycling - Scrap recycling
|
|
| |
 |
IMPACT PULVERIZER / IMPACT PULVERISER / PVC SCRAP RECYCLING, SCRAP RECYCLING
VERSION: BRAVO |
| INTRODUCTION |
SYSTEMS (INDIA) Impact Pulveriser, Impact Pulverizer, PVC scrap recycling, Scrap recycling is suitable for pulverizing of rigid Plastics material. Impact Pulverizer consists of specially designed alloy steel liner. The liner is in half round shaped, the upper part of the liner is cooled by water circulation to maintain from 40 C to 50 C temperature. The cooling is done in such a manner that the maximum heat transfer takes place in regular cycle.
|
| The following are the special feature of the machine. |
| (a) HAMMER |
| Sixteen hammers are fitted with rotary block one end is fixed with bolts and the other ends of the hammer are fixed with “V” shape teeth rack. These hammers rotate in clockwise direction with a certain space to the liner. Hammers are balanced to avoid vibration and gives smooth service. |
| (b) COOLING JACKET. |
Five cooling jackets are provided to keep the entire body cool to maintain temperature.
|
| (c) BEARING HOUSING |
This is fabricated with MS body fitted with good quality high speed bearing for longer and troubles free service.
|
| (d) FRAME. |
| Frame is fully reinforced to absorb any types of vibration during operation. |
| (e) CONTROL PANEL. |
Equipped with starter voltmeter, ampere meter, rotary switch and phase indicating lamps.
|
(f) Dosing Device for automatic feeding fitted with DC motor and control panel to enhance smooth/ uniform feeding.
|
|
| (g) Cyclone for Pulverize material cooling and collection system with Air Blower to enhance
production capacity and make dust free operation. |
| |
SPECIFICATION |
| Model No. |
Main Drive
1440 rpm-AC Motor |
Dosing Device |
Cooling Media |
Cyclone
Collection |
Size Reduction 90% PASS |
OUTPUT
RATE |
AC
Motor
with Frequency Drive
|
Gear
Box |
Bearing
Housing |
Body |
| Bravo 150 |
30 HP |
2 HP |
2 ½” |
WATER |
WATER
& AIR |
3 H.P.
BLOWER |
20 MESH |
120-150 Kgs./hr |
| Bravo 250 |
40 HP |
2 HP |
2 ½” |
WATER |
WATER
& AIR |
3 H.P. BLOWER (S) |
20 MESH |
180-250 Kgs./hr. |
| Bravo 400 |
60 HP |
3 HP |
3” |
WATER |
WATER
& AIR |
5 H.P.
BLOWER |
20 MESH |
350-400 Kgs./hr. |
| |
|
|
|
|
|
|
|
| IMPORTANT: It is observed that mixing of pulverized material by 10-15% with fresh PVC compound in Twin Screw extruder the production capacity is increased by 2% to 5% and get better gelatinous rate, which improves all properties of PVC pipe e.g. Impact Strength, Reversion, Short Term, Long Term test etc. |
